Surface Protection
SaraWest Plexi Clear Remover is formulated for graffiti, marker, and paint marks on plexiglass and acrylic surfaces. It helps remove contamination without the harsh attack typical solvents can cause on sensitive clear plastics.
B2B Verified
Factory Direct
Heritage 40+
Develop this formulation
A SaraWest base formula for your brand. Evaluation samples are prepared after scope approval and payment.
Development fees cover formulation work, lab time, and evaluation sample preparation. They are charged per agreed project and are required before work begins. Scope, sample quantity, revisions, minimum order quantity (MOQ), and timing are confirmed in your written agreement.
Request development →Submit for review. No payment is taken at this step.
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Typical use cases
- 01Transit shelter and bus stop panels
- 02Facilities with acrylic guards and partitions
- 03School and campus maintenance crews
Lift graffiti from plexiglass fast - no haze, no crazing, no do-overs.
Graffiti on clear panels isn’t just ugly - it turns into lost time, replacement costs, and angry stakeholders when harsh solvents fog or craze plexiglass. Operators need a remover that cuts paint and ink without turning a transparent asset into a cloudy write-off. Rework kills margins; replacing panels kills budgets.
Plexi Clear Remover is built for sensitive clear plastics. Our solvent system targets marker, spray paint, and UV inks while controlling evaporation to minimize stress on acrylic. It wets out evenly, dissolves the tag, and wipes residue-free - no filmy build, no greasy smear. The result is fast removal with clarity intact, so you can return panels to service without polishing or sanding.
Formulated, blended, and filled in Pampa, Texas, inside our 30,000 sq ft plant with nearly 40 years of formulation experience. We QC every batch and support private-label programs with in-house labeling, lot tracking, and production runs sized for distributors and contractors. Ship it under your brand in 16.9 oz, 33.8 oz, 1.3 gal, and bulk options, ready for crews and OEM kits.
- Acrylic-safe solvency removes paint and ink without clouding or crazing.
- Controlled evaporation extends workable time on panels, reducing swirl haze.
- Leaves no film; surfaces are ready for recoat or protective films.
- Low-odor formula suitable for enclosed stations with standard ventilation.
- Private-label and contract-fill from 16.9 oz bottles to 275 gal totes.
Test in an inconspicuous area. Work out of direct sun. Wear appropriate PPE. For most jobs, use undiluted.
Apply to a clean microfiber towel or soft applicator - do not flood the surface. Hold the towel on the mark to pre-wet, then lightly agitate in small circles. Allow 30-90 seconds dwell as needed; do not let the product dry. Wipe away dissolved material with a fresh towel.
For heavy spray paint, repeat with fresh product and towels. For light marker, you may cut 1:1 with water. After removal, wipe with a damp microfiber or a mild neutral cleaner to finish. Ideal working temperature: 50-90°F. Avoid abrasive pads. Compatible with plexiglass and cast acrylic; verify coatings and specialty plastics before use.
- Permanent marker lifted in 1-3 minutes average dwell time
- Typical spray paint tags cleared in 3-7 minutes total process
- No visible haze or whitening under normal facility lighting on tested acrylic
- Zero abrasive polishing steps on successful first-pass removals
- Surface ready for protective film or topcoat within 10 minutes
Buying factory-direct from SaraWest removes the distributor markup and guesswork. You get a tuned acrylic-safe remover backed by nearly four decades of formulation, consistent batch quality, and real technical support. We build to your spec, label under your brand, and ship from our 30,000 sq ft facility in Pampa, Texas. Fewer layers, tighter control, and a product that works the first time save your crews time and your budget money.
