Multi Paint Strip Gel
SaraWest Multi Paint Strip Gel is a broad use paint remover for plastic based and oil based paints on wood and mineral substrates. It gives contractors one product for many mixed coating restoration jobs.
B2B Verified
Factory Direct
Heritage 40+
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Fast path
Take this formula as-is, your label.
Library formula already shelf-tested. Your artwork, your pack. From 1,000 units.
Start a fast projectCustom path
Use this as a starting point, customize it.
Scent, viscosity, color, claims. Our chemists tune it to your spec. Sample in weeks, not a year.
Spec a custom versionTypical use cases
- 01Historic façade and trim restoration crews
- 02General contractors on repaint and rehab
- 03Masonry and concrete restoration teams
One gel that strips mixed paint systems on wood and masonry without running.
Mixed jobs rarely come one coating at a time. You’re facing unknown layers - plastic-based acrylics over old alkyds - on vertical siding, trim, brick, and block. Thin liquid removers run, flash too fast in wind or sun, and force reapplications. Every extra pass burns labor, hoses down the site, and risks substrate damage.
SaraWest Multi Paint Strip Gel solves that with a high-solids, slow-flash gel system tuned to break both plastic-based and oil-based binders. It hangs on verticals, penetrates multiple coats, and keeps working in a controlled, wet film so you can lift more paint per pass. The balanced solvent/activator package targets common architectural systems, then rinses clean with water or a mild detergent solution. Usable across typical site temperatures, it gives contractors one dependable SKU for wood and mineral substrates.
Formulated and filled in our 30,000 sq ft plant in Pampa, Texas, we back it with nearly 40 years of formulation discipline, batch traceability, and repeatability. We pack in 1.3 gal and 5 gal pails and support private-label programs with fast artwork turnarounds. Put your brand on proven chemistry, manufactured at 8207 FM 2300, Pampa, TX 79065.
- High-solids gel clings to vertical and overhead surfaces without sagging.
- Balanced solvency cracks acrylic/latex and alkyd films in one product.
- Extended dwell window reduces reapplications and labor on mixed systems.
- Rinses clean with water or detergent, minimizing residue and rework.
- Consistent batch-to-batch performance backed by US manufacturing controls.
Test a small area to confirm dwell time and substrate tolerance. Do not dilute. Mask adjacent surfaces. Apply generously by brush or roller at a uniform 1/16–1/8 inch film, ensuring full coverage without dry spots. For heavy build, apply a second wet-on-wet coat after initial set.
Dwell time: 10–45 minutes for typical acrylic/latex paints; 45–180 minutes for alkyd/oil systems or multiple layers. Keep the gel wet; if edges begin to dry, re-wet or cover with poly sheeting. Optimal surface temperature is 60–85°F; minimum 50°F. Avoid direct midday sun and strong wind.
Lift softened coating with a scraper. Follow with a low- to medium-pressure water rinse or a detergent wash to remove residue. On wood, use minimal water and allow to dry before sanding or recoating. Collect paint waste and rinse water per local regulations. Repeat if heavy build or unknown coatings persist.
- Removes 2–4 paint coats per application under typical site conditions.
- Cuts labor time 25–40% versus thin liquid removers on verticals.
- Reduces reapplication passes by 1–2 on mixed acrylic/alkyd systems.
- Delivers a clean, paintable substrate within the same workday.
- Minimizes runoff and overspray cleanup due to non-sag gel film.
Distributors add margin without adding chemistry. We formulate and fill in Pampa, Texas, so you buy factory-direct and keep the value in your project or your brand. Our team has decades of coating-removal experience and tunes gels for real jobsite variables - film build, temperature, dwell. You get consistent batches, fast lead times, and private-label control without guesswork or inflated markups.
