Cold Degreaser
SaraWest Cold Degreaser removes oil and grease bound contamination from vehicles, machines, engine parts, workshop tools, and industrial equipment. It is useful where water based cleaners are not enough.
B2B Verified
Factory Direct
Heritage 40+
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Fast path
Take this formula as-is, your label.
Library formula already shelf-tested. Your artwork, your pack. From 1,000 units.
Start a fast projectCustom path
Use this as a starting point, customize it.
Scent, viscosity, color, claims. Our chemists tune it to your spec. Sample in weeks, not a year.
Spec a custom versionTypical use cases
- 01Fleet maintenance bays and rebuild lines
- 02Oilfield and mining equipment degreasing
- 03Municipal and DOT shops in cold climates
Cold-solvent punch that strips oil-bound grime fast at shop-floor temps
When grease is baked on, soaked in oil, and packed with road grit, water-based cleaners stall out. Brushes, heat, and repeat cycles burn labor and keep bays blocked. Winter makes it worse - cold metal, viscous oils, and slow rinses. Operators need a fast, cold-effective way to break the bond so parts move, inspections happen, and equipment gets back to work.
SaraWest Cold Degreaser is a non-chlorinated solvent system engineered to penetrate oil-bound soils and lift heavy petroleum residues without heat. Its wetting package drives into tight interfaces on engines, chassis, and shop tools, liquefying grime in minutes. Use it straight through low-pressure sprayers, parts washers, or wipe-downs. Rinse with water or wipe to dry - low film, no chalk, no surfactant stickiness. Non-emulsifying behavior helps oil break out in separators for easier waste handling.
Built and filled in our 30,000 sq ft plant in Pampa, Texas, this formula reflects nearly 40 years of applied degreasing chemistry. We hold tight batch specs so your label ships consistent, quarter after quarter. Choose factory-direct white label or custom spec - fragrance, solvency, dye, and packaging - from 34 oz bottles up to 55-gal drums, without distributor layers.
- Cold-effective solvency liquefies heavy oils in 2–10 minutes without heat
- Non-chlorinated, high-wetting blend minimizes residue and wipe passes
- Non-emulsifying for faster oil breakout in separators and easier disposal
- Safe on ferrous metals and aluminum; controlled action on painted surfaces
- Factory-direct white label with tight batch-to-batch consistency
Use undiluted. Apply by low-pressure sprayer, brush, or parts washer to cool surfaces (40–120°F). Wet the soil thoroughly; avoid atomizing into air. Allow 2–10 minutes of dwell depending on soil load. Agitate with a stiff brush on heavy deposits. Do not let product dry on surface.
Rinse with low- to medium-pressure water, or wipe with clean rags for dry-service parts. For tight assemblies, use directed flow and compressed air to chase out loosened soils.
Compatibility: Works on steel and aluminum. On painted, powder-coated, rubber, and certain plastics, test in a small area first and reduce dwell if softening is observed. Do not mix with water in the container; charge parts washers with product as supplied. Keep away from ignition sources; use with adequate ventilation.
- Heavy petroleum soils begin to flow within 2–5 minutes at room temperature
- One- to two-pass cleaning on most engine bays and chassis components
- Reduced brush time per unit by a full cycle compared to water-based-only
- Faster oil breakout in separators versus emulsifying detergents
- Cleaner, low-film surface ready for inspection, repaint, or reassembly
Factory-direct means your label gets proven degreasing chemistry without distributor markups or slow spec changes. We build and fill in Pampa, TX, so lead times are tight and freight lanes are straightforward. You get formulation depth from nearly 40 years on the plant floor - solvency balance, wetting, residue control - tuned to real equipment, not a catalog page. The result is consistent performance, predictable cost, and a private-label partner who answers with production, not middleman promises.
