Smooth Surface Graffiti Remover
SaraWest Smooth Surface Graffiti Remover is designed for graffiti on non porous or industrial painted surfaces where a heavy masonry remover may be too aggressive. It targets spray paint, ink, and marker residue while helping protect the underlying coating when used correctly.
B2B Verified
Factory Direct
Heritage 40+
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Fast path
Take this formula as-is, your label.
Library formula already shelf-tested. Your artwork, your pack. From 1,000 units.
Start a fast projectCustom path
Use this as a starting point, customize it.
Scent, viscosity, color, claims. Our chemists tune it to your spec. Sample in weeks, not a year.
Spec a custom versionTypical use cases
- 01Municipal facilities and public works crews
- 02Transit yards, stations, and rail assets
- 03Property managers handling painted metal doors
Lift spray paint off smooth, coated surfaces without burning the basecoat.
Tags on painted metal doors, powder-coated railings, and glass show up fast. Removing them without scarring the surface is the hard part. Heavy masonry strippers etch or lift the basecoat. Thinners just smear pigments and leave ghosting. Crews waste hours testing products that either bite too hard or not at all, then end up compounding to hide haze. Every extra pass is more labor, more risk, and more downtime for assets that should be back in service.
SaraWest Smooth Surface Graffiti Remover is built for nonporous and industrially painted substrates. Its controlled-solvency blend wets and undercuts aerosol enamels, inks, and dye-based markers, then releases them cleanly. Evaporation is tuned to stay active without flashing off, while co-solvents and surfactants keep residue in suspension to wipe or rinse away. Used per directions, it targets the tag, not the topcoat - protecting powder coats, baked enamels, 2K urethanes, and glass. Fast dwell, minimal agitation, less shadowing, and no chalky aftermath.
Formulated and filled in Pampa, Texas, inside our 30,000 sq ft plant with four decades of bench chemistry behind it. We supply consistent, batch-traceable product and put your brand on the label or ship in bulk for your network. Choose sizes from 16.9 oz to 5 gal pails, or spec private-label packaging to fit your line.
- Built for nonporous, coated surfaces without overcutting industrial paints.
- Controlled-solvency blend targets paint and ink, not the basecoat.
- Optimized evaporation prevents flash-off and reduces shadowing or haze.
- Ready-to-use; fast dwell with minimal agitation saves labor.
- Rinses clean and works with pressure washers and reclaim systems.
- Private-label options with short lead times and batch traceability.
Preparation: Work on a cool, dry surface out of direct sun. Test in an inconspicuous spot. Use undiluted. Wear appropriate PPE.
Application: Apply liberally by sprayer or towel to a manageable area. Allow 30 seconds to 5 minutes of dwell depending on age and thickness of the mark. At 60–90°F, most aerosol paints release within 2–4 minutes; extend dwell in cooler conditions. Avoid hot surfaces above 100°F to prevent premature evaporation.
Agitation and removal: Agitate with a non-scratch pad or microfiber as needed. Wipe residue and rinse with clean water, or rinse using a pressure washer where appropriate. Repeat for layered tags.
Compatibility: Safe for glass, powder coats, baked enamels, and 2K urethanes when used as directed. Always test on acrylic, polycarbonate, vinyl decals, matte wraps, fresh latex, and uncured alkyds. Not intended for porous masonry - use a masonry-grade remover for brick, block, or raw concrete.
- Removes fresh aerosol paint from glass in under 2 minutes at 70°F.
- Achieves 90%+ tag removal on baked enamel in a single pass.
- Reduces post-cleanup polishing or compounding steps by up to 50%.
- Cuts solvent consumption versus lacquer thinner by 30–60% per job.
- Maintains basecoat gloss change under 5 gloss units on tested finishes.
Distributors add margin, not performance. Factory-direct with SaraWest means the chemists behind the formula can tune it for your substrates, packaging, and climate. You get tighter QC, batch traceability, and documents that match what you receive. Built and filled in Pampa, Texas, we run consistent lots and ship on dependable schedules. Fewer middlemen, deeper formulation support, and pricing that lets your brand win contracts without compromising the chemistry.
