Graffiti Lift Liquid
SaraWest Graffiti Lift Liquid is a professional liquid remover for graffiti on porous and non porous surfaces where spray or wipe application is preferred. It is useful for larger surface areas, repeating maintenance routes, and pressure washing crews that need fast application.
B2B Verified
Factory Direct
Heritage 40+
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Fast path
Take this formula as-is, your label.
Library formula already shelf-tested. Your artwork, your pack. From 1,000 units.
Start a fast projectCustom path
Use this as a starting point, customize it.
Scent, viscosity, color, claims. Our chemists tune it to your spec. Sample in weeks, not a year.
Spec a custom versionTypical use cases
- 01Municipal graffiti abatement crews
- 02Pressure washing route operators
- 03Transit and fleet facilities
Route-ready liquid graffiti remover for porous and non-porous surfaces.
Tags don’t wait. Routes stack up. Substrates change every block - painted metal, glass, brick, block, and coated signs. Operators need a liquid that lays down fast, wets evenly, and clears acrylics, enamels, and markers without chewing up intact coatings or leaving stubborn shadowing. Gel smear, long dwell, and heavy rinsing kill productivity. If the product dries out or foams under pressure, crews lose time and burn water.
Graffiti Lift Liquid solves the route problem with a high-solvency, low-foam system that sheets across surfaces, penetrates pores, and releases color bodies cleanly. It stays workable, resists premature drying, and rinses without filming - ideal before hot-water pressure wash. On intact factory coatings and glazing, it strips tags fast when used as directed. On masonry, it drives solvent action deeper while holding soil in suspension so it’s not re-deposited.
Made in Pampa, Texas, inside our 30,000 sq ft facility with nearly 40 years of formulation work behind it. Every batch is QC-checked and filled to suit your operation - from 33.8 oz bottles to 55-gal drums - under your brand. We build compliant labels, SDS/TDS, and route-ready packs, and we can tune odor, color, or solvency for your climate or substrate mix. White-label without the guesswork.
- High-solvency liquid lays down fast by sprayer, mop, or wipe.
- Stays wet longer for deep pore lift; rinses clean without filming.
- Cuts dwell and rinse time versus gels, boosting route productivity.
- Low foam and low residue, ideal ahead of hot-water pressure washing.
- Contractor packaging from 33.8 oz to 55-gal drums, private-label ready.
Preparation: Remove loose soil. Pre-test on an inconspicuous spot to confirm compatibility and dwell time. Work out of direct sun and wind when possible.
Non-porous surfaces (painted metal, glass, glazed tile, powder coat): Apply undiluted by low-pressure sprayer or towel. Allow 1–3 minutes dwell; do not let dry. Agitate with a soft pad or towel as color releases. Wipe off loosened material, then rinse thoroughly with water. Repeat if necessary.
Porous surfaces (brick, block, concrete, stone): Saturate area undiluted using a pump sprayer. Allow 5–10 minutes dwell, keeping surface wet. Agitate with a stiff brush. Rinse with hot water 160–200°F at 800–2,000 PSI using a fan tip. Avoid etching soft masonry. Repeat for deep shadowing.
Dilution and conditions: Use undiluted for heavy tags. For light overspray or maintenance routes, up to 1:1 with water may be used on resilient, non-porous surfaces. Effective from 40°F to 120°F; extend dwell in cold conditions and reduce dwell on hot surfaces. Never allow product to dry on the surface.
- Lifts 90–100% of common spray paints from sealed surfaces in 3–8 minutes.
- Clears marker and ink tags on glass and metal in under 2 minutes.
- Covers 200–400 sq ft per gallon on non-porous substrates.
- Cuts rinse time 20–30% compared to gel-based removers.
- Reduces second-pass frequency on masonry routes by up to 30%.
Distributors add layers you don’t need. Factory-direct with SaraWest means tested chemistry, tighter specs, and faster turns without the markup. We formulate and fill in Pampa, Texas, so your product ships from a single controlled source with consistent solvency and viscosity from drum to drum. You get private-label options, compliant documentation, and packaging that matches how your crews work. No repackaged mystery blend - just proven performance, direct accountability, and margin you keep.
