Graffiti Bleach Restore
SaraWest Graffiti Bleach Restore is a professional restoring cleaner for severe shadows caused by ink, aniline dye, leather dye, and deep marker stains. It is intended for trained contractors and difficult jobs where standard shadow removers are not enough.
B2B Verified
Factory Direct
Heritage 40+
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Fast path
Take this formula as-is, your label.
Library formula already shelf-tested. Your artwork, your pack. From 1,000 units.
Start a fast projectCustom path
Use this as a starting point, customize it.
Scent, viscosity, color, claims. Our chemists tune it to your spec. Sample in weeks, not a year.
Spec a custom versionTypical use cases
- 01Municipal graffiti abatement crews
- 02Transit, railcar, and depot maintenance
- 03Bridge and tunnel operations teams
Erase stubborn dye shadows your first‑pass remover leaves behind.
You stripped the tag and the color is gone, but a ghost stays put. Ink, aniline dye, leather dye, and deep marker stains lock into pores and keep bleeding back through. Crews end up scrubbing the same square feet, throwing more solvent at it, or repainting whole panels because the shadow won’t die. That burns labor, schedules, and budget.
SaraWest Graffiti Bleach Restore is built for that last 10 percent. A controlled oxidizing system drives into masonry capillaries and etched coatings to break down dye chromophores that solvents can’t touch. Wetting agents keep the surface open; inhibitors help protect compatible substrates while the chemistry works. Low foam, rinses clean, and plays well after standard shadow removers to finish the job instead of starting over.
Formulated and filled in our 30,000 sq ft plant in Pampa, Texas, this is contractor chemistry, not a shelf polish. We supply it white‑label or contract‑manufactured to your spec, with your brand, your SDS/TDS, and packaging that fits your routes. No retail theatrics. Just a reliable dye‑shadow fix you can put your name on and ship by the pallet.
- Oxidative system targets dye chromophores standard solvents fail to remove.
- Optimized wetting keeps porous substrates saturated for uniform shadow breakdown.
- Corrosion inhibitors reduce flash‑rust risk on compatible ferrous surfaces.
- Low‑foam, fast rinse to speed turnarounds and minimize cleanup water.
- Performs in cool or warm conditions from 40–100°F without losing bite.
Pre‑clean the surface and remove bulk graffiti with your standard remover. Rinse and allow to drain. Test a small area to confirm substrate compatibility and results.
Apply Graffiti Bleach Restore by low‑pressure sprayer or synthetic brush. For severe dye shadows, use full strength. For moderate shadows on resilient coatings, dilute 1:1 with water. Keep the area wet; do not atomize. Typical dwell is 5–15 minutes at 40–100°F. Agitate with a synthetic brush on porous masonry as needed. Do not allow to dry.
Rinse thoroughly with high‑volume, low‑pressure water until runoff is clear. Repeat if shadow persists. For hot surfaces or sun‑exposed walls above 100°F, cool the area with water first and work in manageable sections.
Do not mix with acids, ammonia, or other chemicals. Avoid use on bare aluminum, zinc, copper, polished or acid‑sensitive natural stone (marble, limestone), or uncoated soft metals. Always wear appropriate PPE and contain rinse water per local regulations.
- Up to 80–95% reduction of visible dye shadow in one cycle
- Achieves repaint‑ready surface in under 30 minutes, typical
- Cuts repeat solvent stripping passes by 25–40%
- Reduces call‑backs to 0–1 return visits on most sites
- Restores uniform appearance without expanding repaint footprint
Factory direct means your margin isn’t feeding a distributor chain. You get formulation depth from a team that’s spent decades fixing real‑world substrate problems, not repackaging commodity bleach. We build Graffiti Bleach Restore in Pampa, Texas, with tight QA, consistent batches, and private‑label documentation ready for your brand. The result is faster field results, fewer returns, and packaging configured for pallets and routes - not retail shelves.
