Graffiti Lift Cold Gel
SaraWest Graffiti Lift Cold Gel is made for graffiti removal when cooler temperatures make standard removers slower. It is a thickened field product for contractors who work through fall, winter, and early spring and cannot wait for ideal weather.
B2B Verified
Factory Direct
Heritage 40+
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Fast path
Take this formula as-is, your label.
Library formula already shelf-tested. Your artwork, your pack. From 1,000 units.
Start a fast projectCustom path
Use this as a starting point, customize it.
Scent, viscosity, color, claims. Our chemists tune it to your spec. Sample in weeks, not a year.
Spec a custom versionTypical use cases
- 01Municipal graffiti abatement crews
- 02Transit, rail, and tunnel maintenance
- 03DOT, bridge, and highway contractors
Cold-weather gel that clings, lifts, and rinses clean when the mercury drops.
Cold tags don’t wait for spring. Crews still get called to brick, block, railcars, bridges, and storefronts while the thermometer sits near freezing. Standard liquid removers thin out, flash off, and demand heated tents you don’t have time to set. Every pass costs labor, water, and goodwill with property owners who want it gone now - without chewing up the substrate.
Graffiti Lift Cold Gel is built for that gap. We blend a cold-active solvent package with a non-sagging gel thickener that stays put on vertical surfaces and keeps working in 35–55°F conditions. It penetrates aerosol, alkyd, and marker systems, softens the film, and holds contamination in suspension so it rinses free instead of smearing. On masonry, it wets in without racing down the wall; on metals and glass, it lifts fast and wipes or rinses clean.
Formulated and filled in our 30,000 sq ft plant in Pampa, Texas, this is contractor chemistry, not a re-labeled commodity. We white-label to your brand with artwork, tint, viscosity, and scent options, or lock in your spec as a contract blend. Factory-direct means tighter control, faster turns, and pricing that isn’t stacked with distributor margin.
- Cold-active solvent system maintains removal speed at 35–55°F field temps
- Thickened, non-sag gel clings to vertical masonry, metals, and glass
- Balanced bite removes paint without excessive etch on common substrates
- Longer wet edge reduces flash-off and rework in dry, windy winter air
- Rinses clean with cold or warm water; no oily residue left behind
- Contractor-grade formula available white-label in pails and drums
Ready to use. Do not dilute. Test a small, inconspicuous area for substrate compatibility and dwell time before full application. Wear appropriate PPE and protect adjacent sensitive plastics.
Non-porous (glass, painted metal, powder coat): Apply a uniform gel layer by brush or low-pressure sprayer. Allow 5–15 minutes dwell at 40–55°F; up to 20 minutes near 35°F. Agitate with a nylon brush if needed. Wipe with towels or rinse with low-pressure water. Repeat for heavy films.
Porous masonry (brick, block, stone): Lightly pre-wet the surface with clean water to limit deep penetration. Apply a generous coat of gel. Allow 15–30 minutes dwell at 40–55°F; up to 40 minutes near 35°F. Agitate, then rinse with a pressure washer 1,500–2,500 PSI using a 15–25° tip. Warm water (120–160°F) accelerates release when available.
Temperature guidance: Effective in cool conditions where standard removers slow. Avoid application below 25°F or on sun-heated surfaces above 90°F. Do not allow the gel to dry; re-wet with additional product if needed.
- 5–15 minute dwell on non-porous surfaces at 40–55°F before rinse
- 15–30 minute dwell on porous masonry at 40–55°F to full release
- Typical coverage of 80–140 sq ft per gallon depending on texture
- Commonly achieves removal in 1–2 cycles on brick and block
- Rinses residue-free with cold water, reducing follow-up wiping steps
Buying factory-direct from Pampa, TX removes distributor layers that add cost without adding chemistry. You get a purpose-built cold-weather gel from a team with nearly 40 years of formulation experience, not a warm-weather stripper reboxed for winter. We tune solvency, viscosity, and evaporation to your spec, fill in pails or drums, and keep lead times tight. The result is better performance in the cold, cleaner rinses, and pricing that protects your margin.
