Epoxy Strip Liquid
SaraWest Epoxy Strip Liquid dissolves epoxy coatings and two component paint systems on industrial parts and hard surfaces. It can be used locally or in process workflows depending on the job.
B2B Verified
Factory Direct
Heritage 40+
Made in Pampa, Texas
Our chemists are downstairs. Your product is made right here.
Fast path
Take this formula as-is, your label.
Library formula already shelf-tested. Your artwork, your pack. From 1,000 units.
Start a fast projectCustom path
Use this as a starting point, customize it.
Scent, viscosity, color, claims. Our chemists tune it to your spec. Sample in weeks, not a year.
Spec a custom versionTypical use cases
- 01OEM rework and warranty repair cells
- 02Equipment remanufacturing and core cleaning
- 03Metal fab shops removing failed topcoats
Fast-acting epoxy stripper for two-part coatings without blasting or heat.
Epoxy and two-component urethane don’t give up easy. Operators lose hours in blasting booths, risk substrate damage, and burn schedules waiting on heat or caustics that still leave bonded edges. Vertical panels dry out before the film releases. Dip tanks gum up. Rework turns into scrap. All while you’re trying to keep throughput moving and parts paint-ready without attacking the base metal.
Epoxy Strip Liquid solves it with a high-solvency blend, activators, and wetting agents tuned to penetrate crosslinked networks, swell the film, and shear bonds at the substrate. It clings to verticals, manages evaporation to extend dwell, and rinses clean with an alkaline wash. Inhibitors help protect steel and aluminum when used as directed. Brush-on, low-pressure spray, or dip tank - predictable dwell at 50–90°F. It removes epoxy, urethane, and other 2K topcoats so you can reset surfaces without blasting.
Made in Pampa, Texas at our 30,000 sq ft facility with four decades of formulation depth. We fill under your label and spec - drums and pails - with options like color tracer and target viscosity. Factory-direct eliminates distributor markups and gives you consistent batches, documentation, and a private-label partner that protects your margins.
- High-solvency blend attacks crosslinked epoxy and urethane without blasting.
- Controlled evaporation and cling extend dwell on vertical and complex geometries.
- Rinseable surfactant system leaves parts paint-ready after alkaline wash.
- Inhibitor package helps protect steel and aluminum during strip cycles.
- Works brush-on, recirculating, or dip tank at 50–90°F.
- Built for white-label consistency with tight lot-to-lot variance.
Use at full strength. Test a small area first to confirm dwell time and compatibility. Remove loose debris. Apply by brush, mop, or low-pressure sprayer until the surface stays wet. For dip tanks, fully immerse parts with adequate turnover or gentle agitation.
Operate at 60–90°F for predictable results. Typical dwell for two-part coatings is 10–45 minutes; heavy build-ups or multiple layers may require 1–4 hours. Keep surfaces wetted; reapply if the film begins to dry. Agitate with a nylon brush or plastic scraper as the coating lifts.
Rinse thoroughly with water or an alkaline detergent wash to remove residue. Collect and dispose of spent stripper and loosened coatings per local regulations. Dry completely before recoating. Always verify downstream paint adhesion on a representative part.
- Typical dwell 30–90 minutes at 70°F for 2–6 mil epoxy films.
- Reduces abrasive blasting time by 1–3 hours per equipment panel.
- Enables repaint the same shift after a single alkaline wash and dry.
- Cuts blasting media and nozzle wear costs by 30–60% on rework.
- Stabilizes rework timing, reducing strip-time variability by over 50%.
Factory-direct beats stacked distributor markups and guesswork formulations. With SaraWest you get a purpose-built epoxy stripper, tuned by formulators who have been solving coating problems for forty years. We blend and fill in Pampa, Texas, control raw inputs, and hold tight lot specs so your private-label product performs the same every time. You get drums and pails under your brand, supported by documentation and predictable lead times - no middlemen, no surprises, and a margin structure that works at scale.
